Cctalk protocol manual

USB/RS to CcTalk COMMUNICATION BOARD 18/04/ 1 1. INTRODUCTION This adapter board converts communications from RS or USB serial protocol to ccTalk protocol. This way, it offers the possibility to connect a Master device using serial protocol communication to control and monitor ccTalk devices plugged into a bus. in the manual “Protocol cctalk Hopper U-II”) It is possible to transform a standard Hopper U-II into a Hopper U-II plus with a kit. Once the kit is installed, it is only necessary to change the position of dipswitch 7 (to ON) so that the standard U-II standard works as a Hopper U-II plus. Hopper U-II plus conventional. The APS Master Interface® is a Multi-Protocol software that allows the connection of a Bill Validator, Coin Acceptor, Bill Dispeser, Bill Recycler and Coin Hoppers using the standard MDB Vending Protocol, ccTalk and also vendor specific protocols from Fujitsu, MEI, CPI, JCM and Azkoyen brands.

The most important document is the ‘cctalk Serial Communication Protocol - Generic Specification’ (of which this FAQ is now part) which explains how the protocol works and the history behind it. More detailed information can be found in product manuals for each cctalk peripheral. The latest copy of the generic specification can be. USB/RS to CcTalk COMMUNICATION BOARD 18/04/ 1 1. INTRODUCTION This adapter board converts communications from RS or USB serial protocol to ccTalk protocol. This way, it offers the possibility to connect a Master device using serial protocol communication to control and monitor ccTalk devices plugged into a bus. communication manual for the product concerned should provide a definitive command list. See Appendix 13 for a minimum acceptable implementation. Payout Commands This is the recommended command subset for all cctalk peripherals which return ‘Payout’ as the category identification. This is the case for serial compact hoppers etc.

The NV9 USB supports the ccTalk serial protocol for easy interfacing with host machines that support this protocol. To use ccTalk® mode, the CCT interface must. The coin hopper communicates with the machine controller via a serial protocol (cp. Chap. " ccTalk machine interface", p. 35). Multi-Protocol: The ccTalk PCI Card was specifically designed from the outset to offer a single PC interface to money handling equipment though many different.